New stainless steel tilt locking lever for the Hobart/Stephan VCM 40 and 25. This is a direct replacement and will attach to both OEM and JPM bearing bolts. If you need to adjust the locking location of this tilting lever, you can shim it using brass washers.
The brass washers come in two different sizes, 1mm and 2mm. The 1mm washing will adjust the locking angle by 90 degrees, and the 2mm washer by 180 degrees.
You can find the brass washer under the recommended products on this product page.
|Replacement for the following OEM Part Numbers:
- Hobart/Stephan VCM 40: M-82840 & M-84037