We preform equipment rebuilds on a daily basis with our full service fabrication and equipment refurbishment department. Our equipment rebuild service is the perfect option to get your equipment running in chipper shape!
VCM REBUILD SERVICE
We preform equipment rebuilds on a daily basis with our full service fabrication and equipment refurbishment department.
We rebuild all Berkel, Stephan and Hobart Vertical Cutter/Mixers (VCM) 25, 40 and 44 models. We have turned the worst of machines into brand new, factory condition.
We offer affordable freight options and handle all the pick ups and deliveries for you. Our expertly trained technicians carefully inspect every working aspect of the rebuild to ensure it leaves our facility ready for years of production.
Our rebuild service also extends to other restaurant equipment, please contact us for pricing.
The cost for our standard rebuild starts at $995 per mixer plus freight both ways. Contact us for a free freight quote.
Our rebuild typically takes 2-4 weeks to complete and can depend on cosmetic options.
Powder Coated Frame: +$650
Polished Lid: +$325
Stator Rewind: +$1215
SCOPE OF WORK
Our standard rebuild consists of a full inspection of the mixer and the removal of the rotor for the bearing replacement.
We replace both upper and lower bearings with high quality, double sealed, grease packed ball bearings. All electronics, motors and safety mechanisms are checked for 100% functionality. We finish the job with the installation of new a bowl seal and shaft sleeve.
You can give us a call at 800-651-9271 and provide us with your address, or use the button above to schedule online.
There are no up-front costs to get your rebuild started. Our only request is that you strap the mixer to a pallet prior to the scheduled pickup. Before the truck arrives at your location we will e-mail you the paperwork for the shipment. Once the mixers arrive to our shop we'll contact you with our initial equipment review.
OTHER EQUIPMENT REPAIR
Our equipment repair services extend beyond vertical cutter mixers.
We repair all types of restaurant equipment, including but not limited to:
Dough Dividers, Dough Presses, Pan Oilers, Warmer Cabinets, Planetary Mixers & more!
VCM 44 ATTACHMENT REPAIR
A common problem with the VCM 44 is damage to the attachment shaft caused from blade hop. With our full service machine shop, we are able to repair damaged top motor shaft without having to replace the entire rotor.
VCM 44 ROTOR EXCHANGE
This exchange program is perfect for customers who need their mixer up and running as quickly as possible. If you have the time to wait to have your rotor repaired, you can mail your rotor to us without a core deposit charge.
We offer a blade sharpening service with a fast turn around time. This service costs $25 a blade plus return shipping. Simply send you blades to us with your contact information in the box.
Due to the high cost of replacing a specialized motor, most of customers take advantage of our stator rewind service. This service is priced at $1215 + return shipping.
We offer a service to re-sleeve bearing housings. Once the bearing housing are out of spec, the mixer may vibrate or knock during mixing. Contact us for more information.
VCM 44 ATTACHMENT PIN REPAIR
Hate to throw away your dough blade or cutting assembly just because the pin has snapped? No worries! We can replace the pin with a fast turn-around time.
Do not hesitate to contact or come to us if you have any problem with your equipment. You can find us here:
- 1435 Ellerd Drive. Turlock, CA 95380
- 800-651-9271 - Call or Text
OPENING HOURS - PST
07:00 – 3:30
07:00 – 3:30
07:00 – 3:30
07:00 – 3:30
07:00 – 3:00
Click the button below to schedule online. You can also give us a call at 800-651-9271 and provide us with your address. There are no up-front costs to get your rebuild started. Our only request is that you strap the mixer to a pallet prior to the scheduled pickup.
After submitting the form one of our sales associates will reach out to you to confirm the details.