Introducing the NEW JPM QUAD CHOPPER!
With our Quad Chopper kits you'll be ready to convert your existing chopper assembly into a FOUR BLADE SETUP! This JPM Parts exclusive product works for both the VCM 40 and VCM 44 assemblies.
Cutter shaft is not included in these kits.
There are multiple kits available ranging from the hardware kit, upgrade kit, full upgrade kit and the complete quad assembly. For the complete quad assemblies, please view those products directly below:
Designed to work with all baffle scrapers in the VCM 40 and VCM 44.
The Quad Chopper increases your cutting efficiency in the the VCMs by a factor of two. Our kit will also provide:
- The finest mix possible
- Reduced processing times
- Reduced wear and tear with the lower mixing times
- Smooth, vibration-free operation
Our kit can be installed in two different configurations to slightly lower and raise the height of the blades. Test each configuration to see which one fits your process. All instructions are included.
Here's a breakdown on the different kits offered:
Hardware Kit [1947-HW]
6 EA: Flat Chopper Rings
1 EA: Wing Nut, Chopper Style
2 EA: Pins, Short
4 EA: Pins, Long
Upgrade Kit [1947-UK]
2 EA: Narrow Cutter Blades
6 EA: Flat Chopper Rings
1 EA: Wing Nut, Chopper Style
2 EA: Pins, Short
4 EA: Pins, Long
Full Kit Kit [1947-FK]
4 EA: Narrow Cutter Blades
6 EA: Flat Chopper Rings
1 EA: Wing Nut, Chopper Style
2 EA: Pins, Short
4 EA: Pins, Long
Important notes:
Balancing: All blades used in this assembly should be from the same brand or weigh within a few grams of each other. If you experience vibrations during operations, stop the machine and inspect the balance of the assembly.
Wing Nut: You should only use the wing nut supplied with this kit. Using any other existing nut will collide with the bowl seal and cause damage.
Read More
SHIPPING
Transit times are estimated and does not include processing time. Our processing time in typically no longer than 1 business day. If we experience an issue fulfilling your order within 48 hours we will contact you.After signing for and accepting your merchandise, you are responsible for all damage claims. You must contact us within 7 days of receiving your merchandise if your product is damaged. In the event of a product damage return, you must contact customer service to return merchandise. All returns are subject to a 15% restocking fee. Shipping and handling charges to and from are not refundable.
In a rare occurrence that you receive the wrong part that was ordered, we will pay for the return label and re-shipping fee of the correct item.
For all online orders, you (the customer), are responsible to verify that the shipping details are correct and complete (e.g. suite numbers). If the package is returned to us due to an incorrect address, additional shipping fees may apply.
JPM Parts is dedicated to our customer’s 100% satisfaction. If you ever run into any problems with our products please let us know.